Submersible High Flow Rate High Temperature Verti | RFQ Sourcing Details

The submersion pump specially design for the liquid like strong oxidant liquids, leaching liquids. The motor is usually above the liquid level, and pump body below the liquid level,. The pump body is mostly made of engineering plastics or fluoroplastics. Product parameters 1. Flow rate: 15 Ton/hr - 50 Ton/hr 2.

Delivery head: 10-14m 3. Max. Visocisty: cps 4. Max. Dia of pump line: 140-149 mm 5. Outlet Dia: 38-50 mm 6. Drive: Electric motor 7. Immersion length: 700mm, 1000mm, 1200mm, Non-standard custom Secure Features & Advantages Features: •Single tube design with compact dimension and light weight.

•Various of pump materials: SS316L, engineer plastic PPHT, high corrosion resistant fluoroplastics PVDF, applicable for various of different working conditions. •Thanks to its light weight, this pump can be installed not only in fixed site, but also as a eliminates rely of sliding bearing on external lubricants.

Lighter abrasion avoids replacement of sliding bearing during pump's life cycle. •High efficiency of energy saving and application of three dimensional impeller makes the submerged pump gain bigger flow rate from smaller power. •The pump responds quickly and can be powered up to dispense liquid.

•External float switches or liquid level control cabinets can be connected to automatically control the start and stop of the pump;a pump protector can also be used to prevent the impact of idling, blocking and overloading on the pump. •Various outlet connections, i.e.

plug-in hose connection, threaded or flanged hard pipe connection. •Various sizes of submerged depth, 1.0m, 1.5m, 2.0m, 2.5m, non-standard customization is acceptable. Advantages: 1. High quality material: SS pump use Janpan NSK bearing, PVDF pump use imported USA HC276 with high corrosion resistance. 2.

Sanitary structure for stainless steel pump makes it applicable for food industry. 3. Easy to replace and maintain: Motor and pump adopt adjustable installation structure;a pump can be replaced with different motors easily in 5-10mins. 4.

Leakage-free and high pressure shielding design, ensure its safety for dangerous liquid transfer. And lower down its maintenance cost. 5. High performance & low cost : With decades years experience of inter